QSFP+ TO QSFP+ 100Gb/s Active optical cable -iRunning Technology corp.iRunning Technology corp.HomeDISTRIBUTOR ZONEODM/OEM ProjectTRADING AREASUPPORTABOUTCONTACT USBECOME OUR PARTNER
QSFP+ TO QSFP+ 100Gb/s Active optical cable
FEATURES/SPECIFICATION

QSFP+ TO QSFP+ 100Gb/s Active optical cable 

 

Features

• 4 channels full-duplex transceiver modules
• Transmission data rate up to 28Gbps per channel
• Support 40GE and 56G FDR data rate
• 4 channels 850nm VCSEL array
• 4 channels PIN photo detector array
• Internal CDR circuits on both receiver and transmitter channels
• Support CDR bypass
• Low power consumption <2.5W
• Hot Pluggable QSFP form factor
• Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
• Single MPO connector receptacle
• Built-in digital diagnostic functions
• Operating case temperature 0°C to +70°C
• 3.3V power supply voltage
• RoHS 6 compliant(lead free)

 

Applications

• IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
• Infiniband FDR/EDR
• 32G Fiber Channel

 

Description
The JPT Technologies GQS-MP101-XXXCL is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ SR4 for 100 or 40 Gigabit Ethernet , Infiniband FDR/EDR and 32GFC Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 112.2 Gbps bandwidth. Each lane can operate at 28.05Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates JPT Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service

    
            Copyright © 2018 iRunning Technology corp. All Rights Reserved.